Energy-efficient spray foam solutions for Abilene, TX. Roofing, insulation, and coatings that reduce energy costs and extend roof life by decades.
Full-spectrum spray foam solutions for residential and commercial buildings in Abilene, TX.
Our commercial restoration process preserves your existing roof structure, adds insulation value, and applies a warranted waterproof coating system — saving 50 to 70 percent versus tear-off and replacement on buildings of any size.
Ponding water, chronic leaks, and moisture infiltration destroy roofs and building interiors. Our waterproofing systems use closed-cell spray foam and silicone coatings to create an impermeable barrier that handles standing water indefinitely.
Spray foam roofs are built to last, but they do need occasional repair. Our crews fix bird pecks, foot traffic damage, hail impacts, and coating wear — extending the life of your SPF system without a costly full recoat.
Precision leak detection and permanent repair for active roof leaks. We use infrared moisture scanning and visual inspection to trace the leak to its source, then apply a lasting fix — not a band-aid — so it never comes back.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
New spray polyurethane foam roof installation that creates a seamless, self-adhering membrane with the highest R-value per inch of any roofing system. Energy-efficient, leak-proof, and engineered to last 30 to 50 years with periodic recoating.
Cold floors, musty smells, and high energy bills often trace back to an uninsulated or poorly insulated crawl space. Our closed-cell spray foam seals the entire crawl space envelope — walls, rim joists, and sill plates — creating a conditioned space.
Elastomeric coatings for standing seam, corrugated, and R-panel metal roofs. We seal rust spots, failing fasteners, open seams, and ridge caps — stopping leaks and adding reflective energy savings in a single application.
Our replacement process is thorough: remove existing roofing to the deck, inspect and repair substrate, apply closed-cell SPF to specified thickness, and finish with a UV-protective coating. The result is a monolithic roof system with no seams to fail.
Flat roofs fail at seams, flashings, and penetrations. Our crews specialize in diagnosing and repairing these critical failure points using spray foam, liquid-applied membranes, and targeted coating systems that outlast conventional patch repairs.
Roof restoration saves 50 to 70 percent compared to full replacement while delivering equivalent performance. Our SPF and coating systems seal every seam, add insulation value, and provide a reflective finish that cuts cooling costs.
Attic insulation with spray foam delivers the highest R-value per inch and eliminates the air infiltration that accounts for up to 40 percent of your home energy waste. Our crews install cleanly and efficiently — in and out in one day.
Know the true condition of your roof before problems escalate. Our inspection process covers every component — membrane, flashings, penetrations, drains, and substrate — and delivers a clear, actionable report you can trust.
Silicone coatings provide the longest service life of any roof coating product. Our crews apply them over metal, TPO, EPDM, built-up, and spray foam surfaces — sealing the entire roof in a seamless, reflective, waterproof membrane.
When severe weather damages your roof, our storm response crews deploy fast — securing your property, documenting every impact point for your insurance claim, and restoring your roof with quality materials and expert workmanship.
In a city the size of Abilene, TX, property owners and facility managers need a spray foam contractor who can handle any scale — from single-family attic insulation to multi-building commercial roof restorations. Lapolla Industries has been delivering that capability since 2003, backed by a legacy in SPF manufacturing that sets us apart from general roofing contractors.
Our Abilene operations cover the full spectrum of spray foam services: new SPF roof installations, flat roof repair, silicone and elastomeric coatings, attic and crawl space insulation, and emergency storm damage response. Every crew is fully equipped, factory-trained, and committed to the precision that spray foam application demands.
Quality, integrity, and results — the Lapolla Industries difference for Abilene property owners.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
SPF roofing and coating can be applied over existing roof systems without tear-off — no demolition noise, no debris, and no business interruption during installation.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
Common questions about spray foam roofing and insulation in Abilene, TX.
Spray foam insulation costs in Abilene typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Abilene homeowners see a full return on investment through energy savings within 3 to 5 years.
Yes. Every Abilene crew is fully licensed, bonded, and insured for spray foam roofing and insulation work. We carry general liability and workers compensation coverage on every project. You can request proof of insurance before any work begins.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Abilene homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Most residential attic insulation projects in Abilene are completed in a single day. Our crews prep the space, apply the spray foam to the desired thickness, and clean up within 6 to 8 hours. The foam cures within minutes, and you can feel the difference in your home comfort levels the same day.
Yes. Spray foam roofing provides the highest R-value per inch of any commercial roofing insulation — typically R-6.5 per inch. In Abilene, this translates to significant cooling and heating savings because the seamless membrane eliminates air infiltration that accounts for up to 40 percent of energy loss in conventional roofs.
Silicone roof coatings offer the longest service life for flat and low-slope roofs in Abilene. Unlike acrylic coatings, silicone does not re-emulsify in ponding water and maintains its flexibility and UV resistance for 15 to 20 years. We recommend silicone for any Abilene roof with drainage challenges or heavy weather exposure.
See what our customers have to say about their experience with Lapolla Industries.
"Ponding water on our flat roof was causing constant problems. They re-sloped the low spots with tapered foam and applied a silicone coating. No more standing water after rain. Excellent work."
"Full roof replacement on our 12,000 square foot commercial building. Lapolla Industries removed the old single-ply membrane and installed spray foam with a silicone topcoat. Clean work, professional crew, and a 20-year warranty."
"Had spray foam applied to our crawl space walls and rim joists. The difference in floor temperature upstairs is dramatic. Our furnace cycles less and the energy savings paid for the project faster than they estimated."
Looking for a spray foam contractor near Abilene? We serve these surrounding areas too.